AHA-T series compact tower transformer-based UPS, 1–40 kVA single-phase output for small data center and telecom equipment rooms

AHA-T Transformer-Based UPS — 1–40 kVA for Data Centers & Telecom Rooms

AHA-T Series
Rated Output Power
1 – 40 kVA
Input / Output Voltage
1P2W 220/230VAC ±20% or 3P4W 380/400VAC ±20% input; 1P2W 220VAC output
Topology
Online double-conversion, transformer isolated, tower type
Efficiency / Power Factor
≥92%
Battery Voltage
192 VDC
Communication
RS485 / Modbus, optional RS232 / SNMP

Lead Time: 7 – 15 days | Shipping: Worldwide (sea / air / express) | Warranty: 2.5 years full machine

IEC 62040CE

Excerpt

The AHA-T Series Transformer-Based UPS is a compact tower-type online double-conversion unit covering 1 to 40 kVA, designed for small data centers, telecom equipment rooms, government facilities, branch offices and IT closets. With power-frequency isolation transformer, industrial-grade three-proof coating and 192VDC battery bus, it delivers reliable backup power for servers, network switches and telecom infrastructure where space is limited. The three-proof conformal coating (anti-corrosion, damp-proof, dust-proof) allows stable operation in basement equipment rooms, remote telecom cabinets and coastal locations. An independent air duct design separates hot and cold airflow paths for reliable 24/7 operation. The compact tower footprint (starting at 180×460×435 mm) fits in tight equipment rooms and telecom cabinets. With RS485/Modbus and optional SNMP communication, the AHA-T integrates with building management systems and remote monitoring platforms. For larger data center deployments, the AHP-T series 10–200 kVA provides the same transformer-isolation design in higher capacities.

Key Features

✓

1–40 kVA Compact Tower Footprint

Starting at just 180×460×435 mm, fits in tight equipment rooms, telecom cabinets and branch office closets where floor space is limited.

✓

Power Frequency Transformer Isolation

Built-in isolation transformer provides galvanic separation between grid and load, protecting sensitive IT equipment from ground loops and common-mode noise.

✓

Three-Proof Industrial Coating

Anti-corrosion, damp-proof and dust-proof conformal coating on circuit boards allows stable operation in harsh environments — basement rooms, coastal sites, telecom shelters.

✓

1-Phase or 3-Phase Input

Accepts both single-phase 220V and three-phase 380/400V input, making it suitable for branch offices with single-phase supply and industrial sites with three-phase feeds.

✓

Independent Air Duct Cooling

Dedicated airflow channel improves heat dissipation and reliability for 24/7 operation in enclosed equipment rooms.

✓

SNMP / BMS Integration

RS485/Modbus standard, optional SNMP card for IP-based monitoring — ideal for distributed branch office and remote telecom site deployments.

Technical Specifications

System Parameters
Rated Output Power1 – 40 kVA (tower type)
Input Voltage1P2W 220/230 VAC ±20% or 3P4W 380/400 VAC ±20%
Bypass Input1P2W 220VAC (optional 230VAC)
Output Voltage1P2W 220VAC (optional 230VAC) ±1%
Grid Frequency50 / 60 Hz
DC System
Battery Voltage192 VDC
Communication
Communication InterfaceRS485 / Modbus, optional RS232 / SNMP card
Physical & Protection
Overall Efficiency≥92%
Protection ClassIP20
Dimensions (W×D×H)180×460×435 mm up to 400×800×1100 mm
Weight21 – 267 kg (varies by kVA)

Typical Applications

The AHA-T Series is engineered for environments where a single power event can stop production or lose revenue. Wherever continuity matters — in data centres, plants, grids and critical sites — it delivers clean, reliable power when you need it most.

Data Centre & Server Room

Data Centre & Server Room

Keeps racks, cooling and network infrastructure online through mains failure, brownouts and switching, with zero transfer time and clean sinewave output.

Telecommunications

Telecommunications

Protects switching, transmission and BTS/edge sites where a dropped call or a down base station means lost revenue.

Industrial Plants

Industrial Plants

Guards PLCs, drives, robots and process lines against grid dips and outages, cutting downtime, scrap and rework.

Healthcare

Healthcare

Provides clean, uninterrupted power for medical imaging, diagnostics and life-support equipment.

Railway & Transportation

Railway & Transportation

Supplies reliable power for signalling, control rooms and station services across fluctuating grid conditions.

Commercial & Office Buildings

Commercial & Office Buildings

Delivers quiet, reliable backup for lifts, security, HVAC and business-critical office loads.

Remote & Microgrid Sites

Remote & Microgrid Sites

Delivers reliable power off-grid or on weak grids, cutting diesel runtime, fuel cost and maintenance.

Frequently Asked Questions

What is the difference between AHA-T and AHP-T?

The AHA-T series covers 1–40 kVA in compact tower form for small rooms and branch offices. The AHP-T series covers 10–200 kVA in larger towers for data centers and telecom rooms. Both share transformer isolation and three-proof coating — choose AHA-T for compact deployments, AHP-T for higher capacity.

Is this UPS suitable for small server rooms?

Yes. The AHA-T is designed for small server rooms, telecom closets and branch office IT installations. The compact tower footprint (starting at 180×460×435 mm) fits in equipment cabinets where larger UPS units cannot be installed.

What does "three-proof" protection mean?

Anti-corrosion, damp-proof and dust-proof conformal coating on circuit boards. This allows the UPS to operate reliably in basement equipment rooms, coastal locations and remote telecom shelters where standard commercial UPS units may fail prematurely.

Can it be monitored remotely?

Yes. RS485/Modbus is standard, and an optional SNMP card allows IP-based monitoring. This is ideal for managing distributed branch office and remote telecom sites from a central NOC.

What if we need higher capacity later?

The AHA-T covers up to 40 kVA. For larger installations, the AHP-T series (10–200 kVA) or the high-efficiency ADP series (up to 1000 kVA) provide upgrade paths. For sites with voltage sag issues, pair with an AVR DVR for complete power quality.

Who should I contact for this UPS — the factory or Brigoind?

Please contact Brigoind. We are the authorized distributor & engineering partner for AVIC-TECH power systems outside China.
What you receive is far more than a UPS unit — it is a full project delivery package, including load calculation, system sizing, single-line diagram design, battery runtime calculation, tender document preparation, lead-time confirmation, export packaging, ocean freight arrangement and customs documentation.
The UPS equipment is manufactured at AVIC-TECH’s factory in China. Every unit comes with factory test reports and relevant product certification documents, and is covered under AVIC-TECH’s official warranty.
Brigoind handles your project communications from initial inquiry through on-site commissioning guidance with multi-language support.
We coordinate after-sales support aligned with your local time zone.
For urgent inquiries, reach us via WhatsApp: +86 135 9996 3955.

Related Products

Why Brigoid

15+
Years Manufacturing
60+
Export Countries
2,000+
Projects Delivered
24/7
Technical Support