Last updated: 10 November 2026
1. About these terms
These terms govern your use of brigoind.com and our quotation, sales and after-sales services. They apply to buyers in all destinations. Clauses 18 and 19 add specific requirements for orders delivered to Saudi Arabia and the Gulf, and to South and Southeast Asia. By using this site or placing an order, you accept these terms. If you do not accept them, please do not use the site or place orders.We are Brigoind, an independent distributor of industrial electrical equipment. We are not the manufacturer of the products we supply. Products are sourced from manufacturers including AVIC Tech and Xichi Electric through their authorised channels. Manufacturer names, model designations and trademarks are used only to identify the products and their compatibility.2. Who you are contracting with
- We sell as an independent seller. We do not act in the manufacturer’s name and cannot bind a manufacturer to obligations beyond its own published warranty and documentation.
- Where you require a direct manufacturer contract, a letter of authorisation, a factory acceptance test (FAT) or a third-party inspection, please raise this at quotation stage. Availability and cost depend on the manufacturer and are confirmed in writing.
- Your contract is with us. Local import agents, customs brokers and service partners we introduce act for the purposes of clearance or service only and do not replace us as your counterparty.
3. Use of the website
Permitted: browsing the site, downloading datasheets for internal evaluation, and requesting quotations.Not permitted:- scraping, bulk copying or automated harvesting of site content;
- republishing our text, photographs or layout as your own;
- submitting false, misleading or third-party inquiries without authority;
- attempting to gain unauthorised access to the site or its systems;
- using our content to train or benchmark a competing commercial service without our written permission.
4. Product information
- Descriptions, images, dimension drawings and performance figures on this site are for guidance. The manufacturer’s current datasheet, together with our written quotation or contract, governs the specification.
- Specifications, enclosures, options and firmware may change without notice. Where a parameter is critical to your application — breaking capacity, short-circuit withstand, battery autonomy, IP rating, ambient temperature, altitude, input voltage and frequency, or certification — please confirm it in writing before ordering.
- Photographs may show options or accessories that are not included in the base model.
- Certificates such as CE, UL, RoHS and ISO are issued for specific models and production batches. We provide copies on request.
5. Quotations and formation of contract
- A quotation is an invitation to negotiate, not a binding offer, unless we expressly state otherwise in writing.
- Prices are valid for the period stated in the quotation, normally 15 to 30 days, and are subject to manufacturer price changes, raw material costs, exchange rates and freight.
- An order is accepted when we issue a written order confirmation or proforma invoice (PI).
- We may decline an order where the model has been discontinued, where the application falls outside the manufacturer’s published limits, where export control or sanctions restrictions apply, or where the information provided is insufficient for correct sizing.
6. Price, payment and taxes
- Currency is as stated in the proforma invoice. Bank charges outside China are for the buyer’s account unless agreed otherwise in writing.
- Standard terms: T/T deposit with balance before shipment; L/C at sight for qualifying orders; cash against documents where agreed. The applicable terms are confirmed in the PI.
- Prices exclude import duties, VAT/GST and other destination taxes, customs clearance fees, port charges and local certification costs unless the quotation expressly includes them. This includes, for example, Saudi VAT at the prevailing rate, UAE VAT, Indian and Southeast Asian GST/VAT, and any withholding tax applicable in your jurisdiction. Where a withholding tax is required by local law, the parties will cooperate on the documentation and the buyer bears the tax.
- Incoterms 2020 apply. Risk and cost transfer according to the term named in the PI, such as FOB, CIF, CFR, DAP, DDP or EXW.
7. Lead time, shipment and delay
- Lead times are estimates based on manufacturer production schedules and are confirmed at order. Stock items typically ship in 2 to 6 weeks; made-to-order items take longer.
- Lead times run from receipt of the deposit and of all technical and documentation information reasonably required, and do not include time needed for the buyer’s import licences, pre-shipment inspection or destination certification such as SASO/SABER, SNI, TISI, SIRIM or CR registration.
- Partial shipments may be made where agreed in writing.
- Delay caused by events outside our reasonable control (see clause 13) does not entitle cancellation without charges, but we will keep you informed and, where possible, offer alternatives.
8. Inspection and claims
- Inspect the goods on arrival. Notify us in writing within 7 days of delivery of visible damage, shortage or a wrong model, including photos and packing list references.
- For latent defects, notify us as soon as they are discovered and within the warranty period.
- Claims received after we can no longer claim against the carrier or the manufacturer may be declined.
- Where a third-party inspection is required at your request before shipment, it must be arranged and paid for by the buyer and completed within the agreed window.
9. Warranty
9.1 Manufacturer warranty
Products carry the manufacturer’s standard warranty for the model and production date. We pass that warranty through to you and handle the claim on your behalf. The manufacturer’s warranty terms govern defects in materials and workmanship.9.2 Our 18-month warranty
In addition, we provide an 18-month limited warranty from the delivery date, covering defects in materials and workmanship under normal use and giving you a single point of contact. Where the manufacturer’s warranty period is longer, the longer period applies.9.3 Exclusions
The warranty does not cover: misuse; operation outside rated conditions of voltage, current, temperature, humidity, altitude, dust or IP environment; unauthorised repair, modification or firmware change; consumables and wear parts; damage in transit not notified within the claim period; normal wear and tear; and failures caused by third-party components, incorrect installation or incorrect parameter settings.9.4 Remedies
At our option, after inspection, we will repair the defective item, replace the defective part or unit, or issue a credit. Replacement with an equivalent model is acceptable where the original model has been discontinued.9.5 What the warranty does not cover
Loss of production, downtime, re-installation labour, travel and site costs, freight to and from our facility unless agreed in writing, or any consequential loss.10. Returns and cancellation
- Standard catalogue items may be returned within 30 days of delivery, unused and in original packaging, subject to inspection and a restocking charge, typically 15 to 25 percent, with freight, duties and any re-import charges at your cost.
- Non-returnable items: customised, OEM-branded, firmware-modified, and items cut or assembled to order.
- Orders cancelled after production has started may be charged for work already performed and for non-cancellable components.
- A return material authorisation (RMA) number is required before any return. Unauthorised returns may be refused, and goods returned without an RMA may be held at your cost.
- Where local consumer protection law grants rights that cannot be excluded for business buyers in your jurisdiction, those rights prevail over this clause.
11. Intellectual property
- Manufacturer trademarks, model names and datasheets belong to their respective owners and are used here to identify products and describe compatibility.
- Site content, including text, layout and photography we produced, belongs to Brigoind. You may quote short extracts with attribution and a link to the source page. Systematic copying, republication or use to train commercial AI models requires our written permission.
- Nothing in these terms grants a licence to use manufacturer marks beyond identifying the products.
12. Export control, sanctions and re-export
- Products may be subject to export control laws, including dual-use regulations. You confirm that you will not use the products in prohibited applications, including nuclear weapons, chemical weapons or missile proliferation, and that you will not supply them to military end users contrary to applicable law.
- You confirm that you will not re-export, trans-ship or transfer the products, directly or indirectly, to a destination, entity or person subject to sanctions, embargoes or restricted-party lists, and that you will obtain any required re-export authorisation. This obligation applies in particular where goods are consolidated or trans-shipped through a third country.
- We may require an end-user statement, an end-use declaration or a non-military declaration, and may decline or suspend an order where restrictions apply or where the declaration is incomplete.
- You are responsible for obtaining import licences and complying with the laws of your destination country, including customs, product safety and certification law.
13. Force majeure
Neither party is liable for failure or delay caused by events beyond its reasonable control, including natural disasters, epidemics, war, civil unrest, sanctions, government action, port closures, strikes, manufacturer plant shutdowns or major supply chain disruption. The affected party will notify the other promptly. If the event continues beyond 90 days, either party may cancel the affected order without penalty in respect of undelivered goods.14. Limitation of liability
- To the extent permitted by law, our total liability arising from any order is limited to the invoiced value of the goods giving rise to the claim.
- We are not liable for indirect or consequential loss, including lost profit, lost production, downtime, penalties, loss of data or third-party claims, except where the law does not permit such exclusion.
- Nothing in these terms excludes liability for death or personal injury caused by negligence, for fraud, or for any liability that cannot be limited by law.
- Technical advice is given in good faith based on the information you provide. Final responsibility for the suitability of a product in your application remains with you.
15. Confidentiality
Drawings, application data and commercial terms exchanged between us are confidential and used only to quote, supply and support your order. We do not disclose them to third parties except where necessary for the order, such as manufacturer technical review, certification or logistics, or where required by law. This obligation continues after the contract ends.16. Grid compatibility, site conditions and application responsibility
- Voltage and frequency: you are responsible for confirming that the rated input voltage and frequency of the ordered model match the supply at your site. Destination grids differ — for example 50 Hz in most of Southeast Asia, and 60 Hz in parts of the Gulf, including areas of Saudi Arabia — and a model rated for one frequency may not be suitable for the other. Where a variant is required, it must be specified in the order and confirmed in the PI.
- Environment: rated performance assumes the ambient temperature, humidity, altitude and ingress protection conditions stated in the datasheet. Operation above the rated ambient temperature, at high altitude, or in dusty or coastal environments may require derating, additional filtering or a higher IP enclosure. Please provide site conditions at quotation stage. Selection made without them is based on standard catalogue ratings.
- System integration: responsibility for upstream protection, cable sizing, earthing, ventilation, battery room design and compliance with local electrical codes rests with you or your appointed installer. We can provide application guidance and typical diagrams on request, but we do not certify third-party system design.
- Critical loads: where loss of supply would cause safety, environmental or major financial consequences, you are responsible for providing redundancy, monitoring and an appropriate maintenance regime. Our products are components within your system, not a guarantee of uninterrupted supply.
17. Service scope and spare parts
- Technical support is provided remotely by email, WhatsApp or online session during our working hours. Commissioning guidance, parameter setting review and fault diagnosis are included at no charge for the warranty period.
- On-site service in your country is not included by default. Where you require a site visit, we will quote travel, visa, and engineer time separately, and we may coordinate with a local partner. Availability depends on destination and visa processing.
- Spare parts and replacement modules are supplied from the manufacturer’s standard range. We will advise the recommended spares holding for critical installations on request.
- Firmware updates are provided where the manufacturer releases them for the model. We do not modify firmware outside the manufacturer’s published options unless agreed in writing.
18. Orders for Saudi Arabia and the Gulf Cooperation Council
- Conformity and clearance: products destined for Saudi Arabia may require registration in the SABER platform with a Product Certificate (PC) and a Shipment Certificate (SC) issued under SASO technical regulations, and may require the G-Mark where the Gulf low-voltage technical regulation applies. Certificates are issued in the name of the importer of record. We will provide the manufacturer’s test reports, declarations and technical files needed to support the application. The buyer or its appointed import agent is responsible for the registration, the fees, and for ensuring that the certificate covers the exact model and batch shipped.
- Timing: SASO/SABER processing time is not included in our lead time. Please start the certification process as soon as the PI is issued to avoid delay at the port.
- Import agent: clearance in Saudi Arabia and several GCC states requires a licensed importer of record or a local agent. Where you appoint one, you remain responsible for its acts, and we will provide documents directly to it at your written instruction.
- Documentation language: commercial documents are issued in English. Where Arabic documents are required by your customs authority or your contract, we will provide bilingual documents on request. Any Arabic translation of these terms is for convenience only unless both parties sign it, in which case the signed version prevails for that contract.
- Taxes: Saudi VAT and other GCC taxes and fees are the buyer’s responsibility unless the quotation is expressly DDP.
- Payment practice: where your bank requires an L/C, the terms must be agreed before production. We do not accept terms that conflict with the payment clause in the PI.
19. Orders for South and Southeast Asia
- Local certification: several destinations require product registration or certification before import, for example SNI in Indonesia, TISI in Thailand, SIRIM or Energy Commission registration in Malaysia, CR marking in Vietnam, and BPS or DOE requirements in the Philippines. The importer of record is responsible for obtaining registration and for holding the certificate in its own name. We will supply the manufacturer’s test reports, CB certificates and technical documents to support the application, and will advise on request which documents are normally required.
- Import licences and permits: obtaining an import licence, a customs identifier and any restricted-goods permit is the buyer’s responsibility. We are not able to act as importer of record in your country.
- Installation and commissioning: installation must be carried out by qualified personnel in accordance with local electrical wiring regulations and the manufacturer’s manual. Where local law requires a licensed contractor or a permit to operate, that requirement is the buyer’s responsibility.
- Taxes and duties: import duty, VAT/GST, withholding tax, and any environmental or e-waste levy at destination are the buyer’s responsibility unless expressly included in a DDP quotation.
- Documentation: certificates of origin, packing lists, insurance certificates and fumigation or non-wood packing declarations are supplied as required by your customs broker. Please state any specific format requirement at order stage.
20. Governing law, arbitration and language
- These terms are governed by the laws of the People’s Republic of China, excluding its conflict-of-law rules.
- The parties will first attempt to resolve any dispute in good faith within 30 days of written notice.
- If the dispute remains unresolved, it will be submitted to arbitration. Unless the parties agree otherwise in writing, the default is the China International Economic and Trade Arbitration Commission (CIETAC), seated in Shanghai, conducted in English by one arbitrator, or three where the amount in dispute exceeds USD 500,000.
- Where both parties prefer a neutral seat closer to the buyer, they may agree in writing to arbitration under the SIAC Rules in Singapore, or under the DIAC Rules in Dubai. The choice of seat must be recorded in the contract or the PI.
- Arbitral awards are enforceable in the jurisdictions of the parties under the Convention on the Recognition and Enforcement of Foreign Arbitral Awards (New York Convention), to which China, Saudi Arabia, the UAE, Singapore, Malaysia, Indonesia, Thailand, Vietnam and the Philippines are party.
- Where both parties agree in writing instead of arbitration, the courts of Fuzhou, Fujian, China, will have jurisdiction.
- Unless the contract states otherwise, the United Nations Convention on Contracts for the International Sale of Goods (CISG) applies to international sales between the parties.
- The English version of these terms prevails. Translations are provided for convenience; where a translation is signed by both parties, the signed version governs that contract.