AES-C 24U integrated lithium battery UPS system cabinet front view — 3kVA to 10kVA all-in-one LiFePO4 UPS solution

AES-C 24U Series 3–10 kVA Integrated Lithium Battery UPS System

AES-C 24U
UPS Capacity
3 / 6 / 10 kVA
Battery Type
LiFePO4 (LFP)
Backup Time
1–4 hours (configurable)
Cabinet Size
600×1000×1250 mm, 24U
Input/Output Mode
1Ø/1Ø · 3Ø/1Ø · 3Ø/3Ø
IP Rating
IP20

Lead Time: 7 – 15 days | Shipping: Worldwide (sea / air / express) | Warranty: 2.5 years full machine

IEC 62619IEC 62040CEUN38.3

Excerpt

The AES-C 24U Series is an all-in-one integrated lithium battery UPS system that combines an online double-conversion UPS (3 kVA, 6 kVA, or 10 kVA) with a LiFePO4 battery cabinet in a single 24U enclosure — eliminating the need for separate battery racks and saving up to 50% floor space. It supports single-phase-input/single-phase-output, three-phase-input/single-phase-output, and three-phase-input/three-phase-output configurations, adapting to both small server rooms and mid-sized critical facilities.The system uses modular 4U LiFePO4 battery packs (440×680×175 mm each), with backup time configurable from 1 hour up to 4 hours by adding or removing modules. Plug-and-play installation means no on-site battery cabling or commissioning delays. An intelligent BMS monitors cell voltage, temperature and state of charge, reducing O&M costs and extending battery life beyond 5,000 cycles.Typical applications include finance, education, healthcare, government buildings, broadcasting and transportation infrastructure where reliable, compact and low-maintenance power protection is required.

Key Features

✓

50% Smaller Footprint with Integrated Design

Combines UPS and LiFePO4 battery into one 24U cabinet, eliminating separate battery racks and saving floor space in data rooms and equipment rooms.

✓

Flexible 1–4 Hour Backup Time

Scales battery capacity from 1 to 4 battery modules (4U each), matching backup duration to your load and budget without oversizing.

✓

3 Input/Output Modes for Any Site

Supports single-in/single-out, three-in/single-out and three-in/three-out wiring, adapting to existing site power grids in both new and retrofit projects.

✓

Plug-and-Play in Hours, Not Days

Pre-wired modular battery packs and factory-tested UPS reduce on-site installation time from days to hours with no complex battery cabling.

✓

BMS Digital Analysis Cuts O&M Cost

Intelligent battery management monitors cell-level voltage, temperature and SoC continuously, reducing maintenance visits and extending service life.

✓

Wide 3–10 kVA Power Range

Covers small (3 kVA) to medium (10 kVA) critical loads with one platform, simplifying spare parts, training and service across multiple sites.

Technical Specifications

System Parameters
Cabinet Size (W×D×H)600×1000×1250 mm, 24U
Input/Output ModeSingle in/Single out · Three in/Single out · Three in/Three out
RouteTop in, top out / Bottom in, bottom out
Installation MethodCement floor / Tiled floor / Electrostatic floor
VentilationAir in from front, exit from behind
Cabinet DesignFront and rear mesh doors
IP Protection LevelIP20
Power Supply & Distribution
UPS Capacity3 kVA / 6 kVA / 10 kVA
UPS OutputIncludes UPS input, output, bypass, maintenance bypass (above 6 kVA)
IT Power DistributionConfigurable as needed
Battery TypeLithium Iron Phosphate (LiFePO4)
Monitoring SystemOptional power & environment supervision display screen
Battery Module Spec440×680×175 mm (4U)
Battery Module Configuration
Backup Time — 1h1 / 1 / 2 modules (for 3 / 6 / 10 kVA)
Backup Time — 2h1 / 2 / 4 modules
Backup Time — 3h3 / 3 / — modules
Backup Time — 4h2 / 4 / — modules

Typical Applications

The AES-C 24U is engineered for environments where a single power event can stop production or lose revenue. Wherever continuity matters — in data centres, plants, grids and critical sites — it delivers clean, reliable power when you need it most.

Data Centre & Server Room

Data Centre & Server Room

Keeps racks, cooling and network infrastructure online through mains failure, brownouts and switching, with zero transfer time and clean sinewave output.

Telecommunications

Telecommunications

Protects switching, transmission and BTS/edge sites where a dropped call or a down base station means lost revenue.

Healthcare

Healthcare

Provides clean, uninterrupted power for medical imaging, diagnostics and life-support equipment.

Railway & Transportation

Railway & Transportation

Supplies reliable power for signalling, control rooms and station services across fluctuating grid conditions.

Commercial & Office Buildings

Commercial & Office Buildings

Delivers quiet, reliable backup for lifts, security, HVAC and business-critical office loads.

UPS Lithium Retrofit

UPS Lithium Retrofit

Replaces lead-acid batteries with lithium to double backup per footprint and extend service life beyond 15 years.

Edge & Telecom Sites

Edge & Telecom Sites

Compact, high-temperature-tolerant lithium backup that frees floor space and withstands extreme site conditions.

Frequently Asked Questions

Q1: What UPS sizes does the AES-C 24U support?

The AES-C 24U covers 3 kVA, 6 kVA and 10 kVA UPS capacities in one cabinet, supporting single-phase or three-phase input and output configurations.

Q2: How long can the AES-C 24U provide backup power?

Backup time is configurable from 1 hour up to 4 hours by adding or removing 4U LiFePO4 battery modules. The exact runtime depends on UPS capacity and actual load.

Does the AES-C 24U require separate battery cabinets?

No. It is a fully integrated all-in-one system — the UPS and LiFePO4 battery are housed in a single 24U cabinet, which saves up to 50% floor space compared to traditional UPS + external battery setups.

Q4: Is the AES-C 24U suitable for 3-phase input sites?

Yes. It supports three-phase input/single-phase output and three-phase input/three-phase output, as well as single-phase input/single-phase output, making it adaptable to various site power configurations.

Q5: What battery chemistry does the AES-C use?

It uses Lithium Iron Phosphate (LiFePO4 / LFP) battery modules, which offer higher energy density, longer cycle life and improved safety compared to traditional VRLA batteries.

Q6: Can I expand backup time after installation?

Yes. The modular 4U battery packs can be added or removed in the field, allowing you to start with 1-hour backup and upgrade to 2, 3 or 4 hours later as needs grow.

Q7: What environments is the AES-C 24U designed for?

It is designed for finance, education, healthcare, government and enterprise data rooms, broadcasting facilities and transportation infrastructure, with IP20 protection for indoor equipment rooms.

Q8: Who should I contact for this UPS — the factory or Brigoind?

Please contact Brigoind. We are the authorized distributor & engineering partner for AVIC-TECH power systems outside China.
What you receive is far more than a UPS unit — it is a full project delivery package, including load calculation, system sizing, single-line diagram design, battery runtime calculation, tender document preparation, lead-time confirmation, export packaging, ocean freight arrangement and customs documentation.
The UPS equipment is manufactured at AVIC-TECH’s factory in China. Every unit comes with factory test reports and relevant product certification documents, and is covered under AVIC-TECH’s official warranty.
Brigoind handles your project communications from initial inquiry through on-site commissioning guidance with multi-language support.
We coordinate after-sales support aligned with your local time zone.
For urgent inquiries, reach us via WhatsApp: +86 135 9996 3955.

Related Products

Why Brigoid

15+
Years Manufacturing
60+
Export Countries
2,000+
Projects Delivered
24/7
Technical Support