19-inch rack-mount online UPS 1–10 kVA in 2U frame, for network cabinets and server racks with SNMP monitoring

19-inch Rack-Mount Online UPS 1–10 kVA for Network Cabinets

ATP Frame
Rated Power
1 – 10 kVA
Input/Output
220VAC / 220VAC, 1-phase
Topology
Online double-conversion, DSP, 19-inch rack
Efficiency
up to 93%, PF 0.9
Battery
24/48/72/96/192 VDC
Communication
RS-232, optional SNMP

Lead Time: 7 – 15 days | Shipping: Worldwide (sea / air / express) | Warranty: 2.5 years full machine

IEC 62040CE

Excerpt

The ATP Frame is a 19-inch standard rack-mount online double-conversion UPS covering 1 to 10 kVA, designed for network cabinets, server racks and telecom equipment rooms. With DSP digital control, active PFC and ultra-wide input voltage range, it delivers clean 220VAC output for switches, routers, firewalls and small servers. The compact 2U frame (starting at 481×400×88 mm) fits standard 19-inch equipment racks, and the optional SNMP card enables remote monitoring from your NOC. Available in 1, 2, 3, 6 and 10 kVA models with configurable battery voltage (24V–192VDC), it scales from small network closets to edge computing sites. For larger rack deployments, the ATP CRT 10–40 kVA rack/tower series provides 3-phase output and higher capacity.

Key Features

✓

19-inch Standard Rack Mount

Fits any server/network cabinet, 2U height saves rack space

✓

DSP Digital Control + PFC

Clean output for sensitive network gear, low input harmonics

✓

Ultra-wide Input Voltage Range

Handles unstable grid in remote telecom sites

✓

Configurable Battery: 24V–192VDC

Match runtime needs from 5 min to hours

✓

SNMP Remote Monitoring

Integrates with NOC and DCIM platforms

✓

Lightweight Frame: 6.5–9 kg

Easy 1U/2U rack installation by one person

Technical Specifications

System Parameters
Rated Output Power1 – 10 kVA (19-inch rack mount)
Input Voltage220VAC, single-phase
Output Voltage220VAC, single-phase
Power Factor0.9
TopologyOnline double-conversion, DSP, PFC
EfficiencyUp to 93%
Battery Voltage24VDC / 48VDC / 72–96VDC / 192VDC
CommunicationRS-232; optional SNMP
Dimensions (W×D×H)481×400×88 mm to 481×665×88 mm
Weight6.5 – 9 kg

Typical Applications

The ATP Frame is engineered for environments where a single power event can stop production or lose revenue. Wherever continuity matters — in data centres, plants, grids and critical sites — it delivers clean, reliable power when you need it most.

Data Centre & Server Room

Data Centre & Server Room

Keeps racks, cooling and network infrastructure online through mains failure, brownouts and switching, with zero transfer time and clean sinewave output.

Telecommunications

Telecommunications

Protects switching, transmission and BTS/edge sites where a dropped call or a down base station means lost revenue.

Industrial Plants

Industrial Plants

Guards PLCs, drives, robots and process lines against grid dips and outages, cutting downtime, scrap and rework.

Healthcare

Healthcare

Provides clean, uninterrupted power for medical imaging, diagnostics and life-support equipment.

Commercial & Office Buildings

Commercial & Office Buildings

Delivers quiet, reliable backup for lifts, security, HVAC and business-critical office loads.

Emergency & Black Start

Emergency & Black Start

Instantly backs critical loads during outages and islands, and supports generator black-start sequences.

Remote & Microgrid Sites

Remote & Microgrid Sites

Delivers reliable power off-grid or on weak grids, cutting diesel runtime, fuel cost and maintenance.

Edge & Telecom Sites

Edge & Telecom Sites

Compact, high-temperature-tolerant lithium backup that frees floor space and withstands extreme site conditions.

Frequently Asked Questions

What size rack UPS do I need for a network cabinet?

For a standard 19-inch cabinet with switches, routers and patch panels, 1–3 kVA is typically sufficient. For server racks with storage, the ATP CRT 10–40 kVA provides 3-phase output and higher capacity.

Can this be monitored via SNMP?

Yes. RS-232 is standard, and an optional SNMP card allows IP-based monitoring from your NOC.

What batteries does it use?

Configurable 24V–192VDC. For longer runtime, add external TB/TBJ VRLA batteries or LiFePO4 lithium packs.

What is the difference between frame and tower?

The ATP tower version stands on the floor; the frame version mounts in a 19-inch rack. Same electronics, different form factor.

Can it run in a telecom closet without cooling?

Yes. The ultra-wide input range and efficient design make it suitable for edge telecom sites. For larger edge deployments, see the ARP modular series.

Who should I contact for this UPS — the factory or Brigoind?

Please contact Brigoind. We are the authorized distributor & engineering partner for AVIC-TECH power systems outside China.
What you receive is far more than a UPS unit — it is a full project delivery package, including load calculation, system sizing, single-line diagram design, battery runtime calculation, tender document preparation, lead-time confirmation, export packaging, ocean freight arrangement and customs documentation.
The UPS equipment is manufactured at AVIC-TECH’s factory in China. Every unit comes with factory test reports and relevant product certification documents, and is covered under AVIC-TECH’s official warranty.
Brigoind handles your project communications from initial inquiry through on-site commissioning guidance with multi-language support.
We coordinate after-sales support aligned with your local time zone.
For urgent inquiries, reach us via WhatsApp: +86 135 9996 3955.

Related Products

Why Brigoid

15+
Years Manufacturing
60+
Export Countries
2,000+
Projects Delivered
24/7
Technical Support